- 消泡母粒(除潮母粒、除湿母粒、吸水母粒)适用于各类适用的PE、PP再生塑料制品生产的企业。原材料中含有微量水分对于塑料制品的生产有着非常严重的影响，因此企业一般采用增加烘干设备对塑料进项烘干处理，这对于能源和人力都是极大的消费，增加产品的成本。而使用本母粒,只需要将其加入原材料中,无需对产品的生产工艺进行任何调整,都可以消除由于水分引起的气泡、云纹、裂痕、斑点等-切问题。
- Defoaming masterbatch (dehumidification masterbatch，dehumidification masterbatch，water-absorbing masterbatch) is suitable for all kinds of enterprises producing PE and PP recycled plastic products. The trace amount of moisture in the raw materials has a very serious impact on the production of plastic products. Therefore,enterprises generally use additional drying equipment to dry the plastic input items, which consumes a lot of energy and manpower and increases the cost of products. With this masterbatch, it only needs to be added to the raw materials without any adjustment to the production process of the product, and the cutting problems such as bubbles，moir，cracks，spots，etc. caused by moisture can be eliminated.
- 将本母粒与受潮塑料原料直接混合均匀，即可进行制品加工生产作业。如用于吹塑生产作业,添加呲例为1%-2%,如用于片材及注塑生产作业，添加比例为2%~5%,具体添加比例应根据塑料受潮情况、用户酌情添加。
- The masterbatch and the damp plastic raw materials are directly mixed evenly and then the product processing and production operations can be carried out. lf it is used in blow molding production operations, the addition ratio of pyridine is 1%-2%. lf it is used in sheet and injection molding production operations, the addition ratio is 2%~5%. The specific addition ratio should be added according to the moisture content of the plastic and the user’s discretion.
- 尼龙真空袋包装、双层袋密封包装、纸塑复合袋包装，5千克/袋、25千克/箱货袋,不允许产品长时间接触空气避免阳光暴晒，雨淋。
- Nylon vacuum bag packaging, double-layer bag sealing packaging, paper-plastic composite bag packaging, 5kg/bag, 25kg/carton bag, do not allow the product to contact the air for a long time, avoid sun exposure and rain.
- 本母粒使用前避免受潮吸湿;
Avoid moisture absorption of this masterbatch before use; - 使用前依照生产量随用随配为佳;
Before use, it is better to use it according to the production volume; - 不得与受潮塑料共同加热烘干，以免造成生产成品质量存在品质瑕疵；
Do not heat and dry with damp plastics, so as to avoid quality defects in the quality of the finished products; - 打开包装前检查包装是否完好，并将未用完的母粒尽快热封包装。
Check whether the package is in good condition before opening the package, and heat-seal the unused masterbatch as soon as possible.
指标 Index
数值 Numerical Value
载体 Carrier
PE/PP
颜色 Colour
白色/灰色/黑色
氧化钙含量
Calcium Oxide Content
75%-85%
熔融指数 Melt Index
2-20g/10min
吸水率
Water Absorption
≥20%
相容性 Compatibility
PE/PP/PVC/ABS
- 广泛应用于模制品，袋制品，片材制品及注塑制品。
- Widely used in molded products, bag products, sheet products and injection molding products.
微信咨询
